Skip to content
View in the app

A better way to browse. Learn more.

Large Scale Modeller

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Eagle Transporter (Laboratory Module) - 1:48 - MPC

Featured Replies

This is my first proper plastic work in over 6yrs. I can't include a Spitfire conversion I was working on as that is on hiatus, and these projects MUST be completed - for my own sanity. I wanted to do something I wasn''t going to beat myself up over in terms of rivet counting.

The two kits used here are the standard Eagle Transporter, and the 'Cargo Pod' versions. I do have to confess that the standard machine was more of less structurally built TEN years ago....I just never got around to finishing it due to magazine work and my wooden ship prototype work.

Now is the time to do this.

Oh, there will be another topic in the future which concentrates on the 'Laboratory' versions of this machine.

Ok, these are the kits:

IMG_2484.jpg

IMG_2485.jpg

And now the cargo machine.

IMG_2483.jpg

IMG_2486.jpg

More as soon as I have it. This might be a slow process.

I don't think I've ever seen an Eagle built. Definitely a unique ship design.

Did you get the detail set that MPC released with the aluminum thrusters?

Nice😀 Always thought the Eagle was one of the cooler TV scifi spacecraft......... Next to the Enterprise, of course.

  • Author
4 hours ago, FG2Si said:

I don't think I've ever seen an Eagle built. Definitely a unique ship design.

Did you get the detail set that MPC released with the aluminum thrusters?

There's actually no need for those as the nozzles are thinly moulded in a way that there's zero seams to remove. Crazy that set costs as much as the model itself.

2 hours ago, Belugawhaleman said:

Nice😀 Always thought the Eagle was one of the cooler TV scifi spacecraft......... Next to the Enterprise, of course.

Don't forget the Liberator in Blake's 7!!

  • Author

I've decided that this topic will concentrate on the Eagle with the Lab module. This is one you don't really seen online, which is a real shame as it's probably my favourite.

To break things up a little for me with all the recent building, I decided to tackle the lab module first. There are quite a few other differences between this and the other Eagle machines. Not only the lab section, but the landing pods have entirely different detail, and the engine configuration is also quite different.

So, here goes.

The kit itself is moulded in an off-white colour which is actually quite easy to set up for photography on a white background...along with some Lightroom and Photoshop manipulation too. There are also a few other parts jigged onto other sprues. In all, this build will seem a little fresher than the standard and cargo Eagles.

What you see here is the majority of that is needed to build the lab module.

DSC_1240.jpg

The base of the module comprises two main parts that need to be glued together and a stiffener added to each end, on the outside. There are also a series of holes which need to be identified for this machine as the same base is also used for the cargo pod. All holes are now drilled out, ready for the greeblies.

DSC_1241.jpg

This is the underside of the module, with the outer frame installed, and all those little greeblies. The real quiz is to try and identify which actual model kits the film model maker used for those details he added to the Eagle filming models.

DSC_1242.jpg

Details of the model look halfway decent, not always the case with sci-fi kits. Can´t wait to see your progress. It´s always nice to see something off the mainstream path built.

Cheers Rob

Great choice James.

I use to watch this show back in the seventies and took that moon-base science really seriously. :) Any planes to build the landing pad as well?

Cheers

Martin

fcag.jpg

mv5bmdliyzayy2etmzmyyy00njlklwe1zwutodmymwfjn2uzywjmxkeyxkfqcgdeqxvymdc0mtuzoq@@._v1_sy1000_cr0013331000_al_.jpg

  • Author

My mum used to say the show was 'as far fetched as a bucket of shite from China' 😆

No plans to do landing pad. If these will fit diagonally in my media wall, all four will be displayed there.

A bit more work today and the lab pod is completed. This was an absolute joy to build. It'll need the tiniest amount of filler in extremely small joints, and that's it. I've not added the directional thrusters to the pod protrusions as they'll be painted metallic and fitted later, after the whole section is painted and decaled.

Here you can see how those protrusions are constructed. It's simply two poles secured into the floor, with the roof angle set on them. The roof is then fitted, followed by the walls, door, and greeblies etc. The assembly then clips into the pod and extra thin cement is run along the joints (from the inside, where I can reach).

DSC_1243.jpg

Here is the assembled lab pod, minus the thrusters which sit under the protrusions (they won't hold without glue, and I need to paint separately anyway).

DSC_1248.jpg

And here's the module from underneath. The landing pads and thrusters aren't glued yet.

DSC_1245.jpg

  • Author

I did say there are a number of major changes with this kit, and some of those are seen here.

Up first is the engine. Despite reworking a lot of parts for this version, they omitted to do the round ball tanks you see on this framework. There's a hole in this that needs deleting. For this, I used Milliput as it dries completely solid and less likely to crack like filler may do.

DSC_1249.jpg

The new engine set is seen on the left here, with the typical Eagle one on the right. The tanks and nozzles are not glued yet.

DSC_1252.jpg

One massive change is these landing gear pods. The exterior is totally different to the original eagle, and this time they included pins to locate the panels. The original kit is designed so that you have to hold parts edge-to-edge in critical positions. So pleased they fixed that. In fact, the completed unit you see is unglued at this point.

DSC_1254.jpg

The corridor passages are common throughout the Eagle types. The undersides tend to be a little concave, so I sprain the plastic outwards so the bottom is more level. The joint is a little unsightly too, so this is filled with sprue goo and sanded back to a polished finish.

DSC_1256.jpg

DSC_1258.jpg

Here you see the module with side equipment tray installed (dry fit) and the cages too...also dry fit.

DSC_1259.jpg

Just so you know I've not been slacking...here's where I'm at.

IMG_2578.jpg

A complete Eagle fleet on your desk, ready to explore the moon, nice.

Cheers Rob

  • Author

The spine looks quite daunting, but it actually quite easy to build.

First, the side parts are in halves which are just glued together. There is then a couple of bracing parts added to one side, as well as a top and bottom rod at each end. When almost set, the other side is married up and then when level, allowed to dry. Once set, the remaining cross braces are popped into place and some thin glue brushed into the joints.

The only bugbear with this, as with any of the framing areas, is that there's a whole load of seams need paring down and then sanding over to a polish. Also, there's a good number of ejector pin marks of varying severity. For these I used Sprue Goo that I'd made from small pellets of the kit sprue. Works a treat.

DSC_1261.jpg

DSC_1262.jpg

I always liked the functional, modular, look of the Eagle, and the kits do it justice.

Even now, though, I am still wondering where the fuel for these big rockets was stored 😉

Hubert

  • Author
4 hours ago, HuberB said:

I always liked the functional, modular, look of the Eagle, and the kits do it justice.

Even now, though, I am still wondering where the fuel for these big rockets was stored 😉

Hubert

It's a mystery!

There are four round bells at the arse end which are piped into the large tanks. That would account for the tail, but without an engine. As for the many underside and pad thrusters, no idea! 😆

  • 2 weeks later...

I have an odd memory associated with the Space 1999 series .

One time, while watching the show with my older brother he

said loudly, " I hate Barbara Bain!" Very Odd. Why hate Bain?

Later he was packed off to Military school. Why waste adolescent

rage on Barbara Bain? Strange thing memories.

Paul

Edited by Belugawhaleman

  • Author

Work is progressing. I thought I'd do a little with the landing gear.

What you see here is a test assembly with the grey foot gear (from another build), and the white foot and components from this kit. They are all the same, but the manufacturer rejigged some sprue parts for the retooling. These actually do work too. When the model is sat down, the weight will bear down on the springs, and the scissors will operate.

DSC_1263.jpg

All Eagle parts are now completely built and a little putty/sprue goo added where needed. The parts were then blasted with compressed air and wiped down with isopropyl alcohol.

DSC_1264.jpg

A number of models I've seen being built, mention using Dark Sea Grey for the gear. I used it but found it too light. Luckily, I have a book which shows the studio models, and found that adding a few % black to the mix, toned it down perfectly. The oleo struts were first 'coloured in' with an AK Chrome pen. It leaves almost a perfect mirror finish that's unblemished. This was protected with some Klear (Future). To further weather the grey areas, I used some Tamiya pastels and did some metallic chipping with a Prisma silver pencil.

DSC_1270.jpg

All jet/rocket nozzles are primed in black and then airbrushed with Polished Aluminium, followed by a dusting of Chrome. Burnt Metal was then applied softly around the outside extremities, to show some heat effect.

DSC_1272.jpg

I've never been a figure painter, and the only part of the kit that's lacking are the crew. Not too bothered though as you'll barely see them. These were painted up, along with the cockpit back wall and then installed to the beak bulkhead. The beak then had masks applied to the clear portions, and the lower clear 'windows' were sprayed black from the inside, as these aren't actually windows. It's a symmetry thing.

DSC_1268.jpg

The complete range of assemblies are then airbrushed with black primer.

DSC_1269.jpg

Lots of progress there James. The subtle wear on the nozzles is a nice touch.

  • Author

As I'm waiting on some modelling supplies to arrive so I can progress, I've now done a little more work on the standard Eagle.

The passenger pod on this generally fits amazingly, but the best way to build it is to NOT add the floor to begin with. Build up the walls and add the roof sides. The roof centre isn't supported for some reason, so here you see the styrene girders I added from within. These will allow the roof centre to sit perfectly flat and supported. My plan is to paint and decal the pod and floor separately, and then paint the clear solar panels black on the reverse...then to fit them into their positions from within, then fit the floor. No awkward masking this way.

IMG_2597.jpg

  • Author

My supplies eventually arrived. Originally went to Jadlam, but had to cancel as no activity on shipping, and calls/emails went unanswered. Went to eModels and got sorted.

I ordered AK's RC809 White Grey and RC827 Solid White. My plan was to mis the two for a pleasing looking colour, but the white grey itself looks perfectly ok. I've sprayed the White Grey here and mostly solid over raised and open areas. Next step will be to thin that colour and slowly build it up overall, leaving the lower areas in a subtly different colour. If I need more modulation, I'll use the solid white to enhance the raised areas, but without it being noticeable in what I've done.

nose.jpg

Never had a problem with Jadlam but eModels is a great resource as well

  • Author
Just now, GusMac said:

Never had a problem with Jadlam but eModels is a great resource as well

I've used Jadlam before without problem, but the last order was ridiculous. Paid a premium for express delivery. Could've walked there quicker and picked it up. No replies to queries.

  • 2 weeks later...
  • Author

I've spent so much time, and two full bottles of AK's Real Colour RAL9002 White Grey, that I am so happy to declare the main colour to be complete. Modulating this and building up the colour from black, has been tedious. I should really have used a Tamiya grey primer as I don't think there would be any noticeable difference. Next step is to decal this beast. I ordered the MPC set to accompany the kit decals, and the aftermarket has FOUR large sheets to do more than one build. This model alone will have well over a hundred decals.

IMG_2609.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.
Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.