June 13Jun 13 Author Hi all,The landing gear and the tail skid have been fitted, prior to fitting the upper wing,Mike
June 13Jun 13 interesting website thanks mike. The resin turnbuckles look more economical but my experience of resin in that sort of scale is its too brittle to be of much use. I will look and see what type i need for a DH4, many thanks
June 16Jun 16 Author Hi all,All rigging now completed.The shots below show the rigging during fitting.Twin and single flying wires.Single landing wires.Interplane incidence wires.Drag wires.Anti-drag wires.Cabane strut bracing wires.Landing gear bracing wires.Aileron control cables (upper and lower wings).Fin bracing wires.Twin rudder control cables.Elevator control cables.Left to fit are the engine exhaust pipes, landing gear wheels, propeller and wing hoops.Two more modifications to add that the kit does not supply are the pitot-static pipes and fuel tank filler cap.Then it's just the display case and of course figures,Mike
June 26Jun 26 Author Hi all,The Armstrong-Whitworth FK.3 with two figures is completed.I'll post shots later on the forum.As usual a fully detailed build log is available on the Build Logs page on my site.Many thanks for your support and comments throughout this build.Now it's back to the OEFFAG Albatros D.III.Mike
June 27Jun 27 She looks just beautiful. Must be so rewarding completing something both non-mainstream and also not injection.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.